N227H Bell 206L-3 accident

NTSB FTW02LA089 · 2002-03-04 · Tulsa, OK

Docket — crew, injuries and powerplant

Summary

The local flight was en route to the company helipad for fuel when the engine lost power approximately 300 yards short of the helipad. During an autorotation to a road, the pilot had to execute an evasive maneuver to avoid a vehicle. Subsequently, at 10 feet agl, the main rotor blades struck 1.5 inch-diameter tree branches. The main rotor RPM decreased, the helicopter landed hard on the road, and the main rotor blades contacted and severed the tail boom. The pilot estimated 300 pounds of fuel was on board at the time of the accident. During the inspection of the helicopter, the engine was started and test run to idle speed, and no anomalies were noted. The fuel nozzle and fuel filters were inspected, and no anomalies were noted. The reason for the loss of engine power was not determined.

Full narrative

On March 4, 2002, at 1235 central standard time, a Bell 206L-3 single-engine helicopter, N227H, was substantially damaged during a forced landing to a road following a total loss of engine power while on approach to a company helipad near Tulsa, Oklahoma. The commercial pilot and his passenger were not injured. The helicopter was owned and operated by Tulsa Security Patrol Inc., d.b.a. Action Helicopter Services of Tulsa. Visual meteorological conditions prevailed, and a flight plan was not filed for the 14 Code of Federal Regulations Part 91 positioning flight. The flight originated from Tulsa's Richard Lloyd Jones Jr. Airport, approximately 1230, and was en route to the company helipad.

The pilot reported that the flight was en route to the helipad for fuel when the engine lost power approximately 300 yards short of the helipad. During an autorotation to a road, the pilot had to execute an evasive maneuver to avoid a vehicle. Subsequently, at 10 feet agl, the main rotor blades struck 1.5 inch-diameter tree branches. The main rotor RPM decreased, the helicopter landed hard on the road, and the main rotor blades contacted and severed the tail boom. The pilot estimated 300 pounds of fuel was on board at the time of the accident.

On March 14, 2002, at a facility in Tulsa, an FAA inspector, the operator's director of maintenance, and the pilot examined the helicopter. Prior to the FAA inspector's arrival, the main rotor blades and main rotor mast had been removed. During the inspection, the engine was started and test run to idle speed, and no anomalies were noted. The fuel nozzle and fuel filters were inspected, and no anomalies were noted. The reason for the loss of engine power was not determined.

Probable cause

the loss of engine power for undetermined reasons. A contributing factor was the lack of suitable terrain for the forced landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
110
Wind speed (kt)
10
Temperature (F)
50
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N227H Bell 206L-3 SUBS 091

Sequence of events

#OccurrencePhase
1 350 Cruise
2 180 Cruise
3 220 Cruise
4 200 Cruise

Findings

Finding
25000 cause
24520
20200
20200
19200 factor
24582
13012
24558