N65021 Cessna 172P accident

NTSB NYC02LA070 · 2002-03-02 · Coatesville, PA · near 40N

Docket — crew, injuries and powerplant

Summary

While the student pilot was landing on runway 11, about 5 feet above the runway, a gust of wind was encountered, which lifted the right wing. The left main landing gear touched down and the gear spring twisted. The airplane began to drift to the left, and after the CFI "gave the student a second or two to recover from this position," he took the controls. Continuing to veer, the airplane departed the left side of the runway, where the left main landing gear collapsed. The airplane came to rest in a grass area. The left main landing gear spring was retained for further examination. According to the manufacturers technical report of the examination, the tubular spring for the left main landing gear fractured at the inboard end. The inboard end of the spring contained a longitudinal oriented fracture that intersected a fastener hole. The fracture face contained chevron marks typical of an overstress fracture that pointed back to the hole, indicating that the fracture emanated from the fastener hole. No evidence of corrosion was noted on the fracture region. Further examination revealed that the fastener hole contained machining marks and fretting. Review of the airplane's maintenance records revealed that the landing gear struts were removed from the fuselage, and floats were installed, in 1992. After about 2,158 hours of service, the floats were removed, and the original landing gear struts were re-installed. The airplane had accumulated about 3,598 hours of total service. The CFI reported that the winds at the airport, about the time of the accident, were from 180 degrees at 8 knots, gusting to 17 knots.

Full narrative

On March 2, 2002, about 1140 eastern standard time, a Cessna 172P, N65021, was substantially damaged while landing at the Chester County Airport, Coatesville, Pennsylvania. The certified flight instructor (CFI) and student pilot were not injured. Visual meteorological conditions prevailed and no flight plan was filed for the instructional flight conducted under 14 CFR Part 91.

According to the CFI, the student was landing on runway 11, a 5,400-foot long, 100-foot wide, asphalt runway. About 5 feet above the runway, a gust of wind was encountered, which lifted the right wing. The left main landing gear touched down, and the gear spring twisted. The airplane began to drift to the left, and after the CFI "gave the student a second or two to recover from this position," he took the controls. Continuing to veer, the airplane departed the left side of the runway, where the left main landing gear collapsed. The airplane came to rest in a grass area.

The left main landing gear spring was retained for further examination at the Cessna Aircraft Company Materials Laboratory.

According to the manufacturer's technical report of the examination, the tubular spring for the left main landing gear fractured at the inboard end. The inboard end of the spring contained a longitudinal oriented fracture that intersected a fastener hole. The fracture face contained chevron marks typical of an overstress fracture that pointed back to the hole, indicating that the fracture emanated from the fastener hole. The overstress fracture region extended for about 3.5 inches from the hole. No evidence of corrosion was noted on the fracture region. Further examination of the fastener hole revealed that it contained machining marks and fretting. The composition and hardness of the material use to produce the spring were within manufacturer specifications.

Review of the airplane's maintenance records revealed that the landing gear struts were removed from the fuselage, and floats were installed, in 1992. After about 2,158 hours of service, the floats were removed, and the original landing gear struts were re-installed. The airplane had accumulated about 3,598 hours of total service.

The winds recorded at a nearby airport, at 1154, were from 150 degrees at 10 knots. The CFI reported that the winds at 40N, about the time of the accident, were from 180 degrees at 8 knots, gusting to 17 knots.

Probable cause

The student pilot's loss of aircraft control which resulted in a hard landing, and the CFI's delayed remedial action. Factors related to the accident were the fatigue cracks which initiated at the attachment hole on the landing gear strut, and the crosswind conditions. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
20000
Visibility (sm)
10
Wind direction
150
Wind speed (kt)
10
Temperature (F)
50
Nearest airport
Chester County
Distance from field
0.0
Airport elevation
660

Aircraft

RegistrationMakeModelDamageFAR part
N65021 Cessna 172P SUBS 091

Sequence of events

#OccurrencePhase
1 200 Cruise
2 260 Cruise
3 190 Cruise

Findings

Finding
10403 factor
20000 factor
24566 cause
24542 cause