N2483B Bell 47G-2 accident

NTSB LAX02LA218 · 2002-07-07 · Compton, CA · near CPM

Docket — crew, injuries and powerplant

Summary

The helicopter experienced a partial loss of engine power during cruise flight, and collided with power lines during a precautionary landing. The pilot felt a severe vibration and noted a drop in the helicopter's rotor rpm. As the vibrations continued, he manipulated the flight controls in an effort to maintain a controlled descent and began an autorotation. While searching for a suitable landing area, about 200 feet agl, he noticed that power lines were in the helicopter's path. He maneuvered the helicopter in a unsuccessful effort to avoid the power lines, and landed hard in a dirt field. A mechanic with inspection authorization (IA), who regularly worked on the helicopter, conducted an examination after the accident. He stated that a fan belt used in the integral system for cooling the engine had either broken or come loose. As a result, the belt wrapped around the pulley, which caused the transmission to drag. He noted that the engine ran fine after the accident, and the fuel system was free of particulates and contaminates. He said that he completed the annual inspection for the helicopter about 14 hours prior to the accident, at which time he believed that he examined the belts. He further stated the helicopter was stored outside, in a corrosive environment.

Full narrative

On July 7, 2002, about 1145 Pacific daylight time, a Bell 47G-2, N2483B, experienced a partial loss of engine power during cruise flight and collided with power lines during a forced landing near Compton, California. The pilot/owner was operating the helicopter under the provisions of 14 CFR Part 91. The pilot and one passenger were not injured; the helicopter sustained substantial damage. Visual meteorological conditions prevailed, and a flight plan had not been filed. The personal local flight originated at the Compton/Woodley Airport about 1100.

In a written statement, the pilot reported that about 45 minutes after departure, the helicopter was about 1,000 feet above ground level (agl), and moving in an easterly direction with an airspeed of 70 knots. He felt a "severe" vibration and noted a drop in the helicopter's rotor rpm. As the vibrations continued, he manipulated the flight controls in an effort to maintain a controlled descent. While searching for a suitable landing area, he verified that the engine rpm indicated zero. About 200 feet agl he noticed that power lines were in the helicopter's path, and turned the helicopter in a unsuccessful effort to avoid them and an accompanying pole. The helicopter came to rest in a dirt field on the corner of the 91 freeway and Alondra Blvd.

During a telephone interview with a National Transportation Safety Board investigator, the brother of the pilot, a mechanic with inspection authorization (IA) who regularly worked on N2483B, examined the helicopter after the accident. He stated that a fan belt used in the integral system for cooling the engine had either broken or come loose. As a result, the belt wrapped around the pulley, which caused the transmission to drag. The pilot autorotated the helicopter into power lines and impacted terrain.

The IA further noted that the engine ran fine after the accident, and the fuel system was free of particulates and contaminates. He said that he completed the annual inspection for the helicopter about 14 hours prior to the accident, at which time he believed that he examined the belts. He further stated the helicopter was stored outside, in a corrosive environment.

Probable cause

the failure and separation of a fan belt for the engine cooling system. A factor in the accident was the inadequate annual inspection 14 hours prior to the accident. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
4
Wind direction
190
Wind speed (kt)
8
Temperature (F)
73
Nearest airport
Compton/Woodley Airport
Distance from field
0.0
Airport elevation
97

Aircraft

RegistrationMakeModelDamageFAR part
N2483B Bell 47G-2 SUBS 091

Sequence of events

#OccurrencePhase
1 352 Cruise
2 180 Cruise
3 220 Cruise

Findings

Finding
15700 cause
24104 factor
20200