N9759B Cessna 180A accident

NTSB LAX03LA143 · 2003-04-26 · Scottsdale, AZ · near SDL

Docket — crew, injuries and powerplant

Summary

The tailwheel equipped airplane had a gear failure while attempting a wheel landing. After a normal touchdown, the airplane lurched to the left and the right main landing gear wheel departed the airplane. The right main landing gear strut folded under the fuselage and the right wing tip contacted the runway surface. The airplane came to rest on its right side. The pilot thought that an "abrupt left brake grab" placed a side load on the right gear, which resulted in the failure of the right main landing gear wheel. The Federal Aviation Administration (FAA) maintenance inspector stated that the forward, upper bolt connecting the axle to the backing plate had sheered off. The other three bolts had twisted off, separating the wheel from the airplane, which he believed occurred after the initial bolt had failed. He thought it was possible that the bolts installed were the original bolts that the airplane was outfitted with in 1957. He believed there was a significant possibility that the sheered bolt had failed due to its age and extended use.

Full narrative

On April 26, 2003, about 1145 mountain standard time, a Cessna 180A, N9759B, experienced a gear failure while attempting to land at Scottsdale Airport (SDL), Scottsdale, Arizona. The pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The private-pilot, the sole occupant, was not injured; the airplane sustained substantial damage. Visual meteorological conditions prevailed and a flight plan had not been filed. The personal local flight departed SDL about 1015.

In a written statement, the pilot reported that he was attempting to make a wheel landing on runway 21. After a normal touchdown, the airplane lurched to the left and the right main landing gear wheel departed the airplane. The right main landing gear strut folded under the fuselage and the right wing tip contacted the runway surface. The airplane came to rest on its right side. The pilot thought that an "abrupt left brake grab" placed a side load on the right gear, which resulted in the failure of the right main landing gear wheel.

The Federal Aviation Administration (FAA) maintenance inspector stated that the forward, upper bolt connecting the axle to the backing plate had sheered off. The other three bolts had twisted off, separating the wheel from the airplane, which he believe occurred after the initial bolt had failed. He thought it was possible that the bolts installed were the original bolts that the airplane was outfitted with in 1957. He believed there was a great possibility that the sheered bolt had failed due to its age and extended use.

Probable cause

The failure of a main landing gear axle bolt, and the subsequent separation of the right main landing gear wheel from the gear strut during the landing roll, which resulted in a collapse of the right main landing gear. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
3
Temperature (F)
77
Nearest airport
Scottsdale
Distance from field
0.0
Airport elevation
1510

Aircraft

RegistrationMakeModelDamageFAR part
N9759B Cessna 180A SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 191 Cruise

Findings

Finding
11303 cause
10410 cause
10401