N5712X Cessna 320 accident

NTSB ANC03LA053 · 2003-05-30 · McCarthy, AK · near 15Z

Docket — crew, injuries and powerplant

Summary

The private certificated pilot, holder of an aviation mechanic certificate, was landing at a remote airport on a cross-country business flight. He said that during the landing roll, the left main landing gear suddenly collapsed. The pilot indicated that the airplane is equipped with one landing gear position light. He said prior to landing, he observed the right main landing gear and the nose gear position via a mirror positioned on the right engine nacelle. They appeared to be extended, and the landing gear position light was indicating green. The airplane received damage to the left flap, and the underside of the fuselage. The pilot indicated the landing gear drive mechanism consists of an actuator rod, driven by an electric motor. He noted that the main landing gear had been subjected to side loads during the flight just prior to accident flight, and either the left main landing gear actuator rod, or associated support structure, may have been damaged. As of July 2004, he had not had an opportunity to thoroughly inspect the landing gear system to determine why the landing gear collapsed.

Full narrative

On May 29, 2003, about 1900 Alaska daylight time, a Cessna 320 airplane, N5712X, sustained substantial damage when the left main landing gear collapsed during the landing roll at the McCarthy Nr2 Airport, McCarthy, Alaska. The airplane was being operated as a visual flight rules (VFR) cross-country business flight under Title 14, CFR Part 91, when the accident occurred. The airplane was operated by Wards Aero Service, Anchorage, Alaska. The private certificated pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed. The flight originated at Merrill Field, Anchorage, about 1750. No flight plan was filed, nor was one required.

During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on May 30, the pilot reported that he was flying to McCarthy as part of his aircraft maintenance business. He said he landed on runway 01, and during the landing roll, the left main gear suddenly collapsed. The airplane received structural damage to the underside of the fuselage. The pilot indicated that the airplane is equipped with one landing gear position light. He said prior to landing, he observed the right main landing gear and the nose gear position via a mirror positioned on the right engine nacelle, and they appeared to be extended. The landing gear position light was green. The pilot noted the landing gear drive mechanism consists of an actuator rod, driven by an electric motor.

In another telephone conversation with an NTSB investigator on July 27, 2004, the pilot said that the airplane's landing gear had been subjected to side loading during the flight just prior to the accident flight, and he suspected the left main actuator rod, or supporting structure, may have been damaged. At the time of this report, the pilot, an aviation mechanic, had not had an opportunity to exam the landing gear mechanism to see if he could determine why the landing gear collapsed.

Probable cause

The collapse of the left main landing gear during the landing roll for undetermined reasons. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
50
Wind direction
0
Temperature (F)
61
Nearest airport
McCARTHY
Distance from field
0.0
Airport elevation
1531

Aircraft

RegistrationMakeModelDamageFAR part
N5712X Cessna 320 SUBS 091

Sequence of events

#OccurrencePhase
1 191 Cruise

Findings

Finding
10401 cause