N3721K Globe GC-1B accident

NTSB ATL03LA143 · 2003-09-20 · Summerville, SC · near JZI

Docket — crew, injuries and powerplant

Summary

According to the pilot, during cruise flight the engine began to make a loud "tapping" noise and began to vibrate. As the pilot maneuvered to make an emergency landing on a dirt road, the engine made a loud "bang," lost power, and collided with a gate on rollout,. Examination of the engine revealed that the number 6 connecting rod bearing failed and the connecting rod separated from the crankshaft. Review of the engine records revealed that the engine was removed from the airplane on September 29, 1987, and reinstalled on the airplane on September 22, 1998. There were no records indicating that the engine was stored in accordance with the manufactures service information letter, SIL99-1: Engine preservation for active and stored aircraft.

Full narrative

On September 20, 2003, at 1115 eastern daylight time, a Globe GC-1B, N3721K, registered to and operated by a private pilot, collided with the ground in the vicinity of the city of Summerville, South Carolina, while conducting an emergency landing. The personal flight was operated under the provision of Title 14 Part 91 and visual flight rules. Visual meteorological conditions prevailed at the time of accident. The private pilot and passenger were not injured. The flight departed Summerville, South Carolina, on September 20, 2003, at 1100.

According to the pilot, during cruise flight the engine began to make a loud "tapping" noise and began to vibrate. As the pilot maneuvered to make an emergency landing the engine made a loud "bang" and loss power. The pilot conducted an emergency landing on a dirt road and the airplane collided with a gate on rollout. Examination of the airplane revealed the right main landing gear was dislodged from the fuselage, and the outboard section of the right wing was bent upward. The pilot reported no flight control malfunctions prior to the flight.

Examination of the engine revealed that the # 6 connecting rod bearing failed and the connecting rod separated from the crankshaft. Review of the engine records revealed that the engine was removed from the airplane on September 29, 1987, and reinstalled on the airplane on September 22, 1998. There was no record that showed the engine was stored in accordance with the manufactures service information letter, SIL99-1: "Engine Preservation For Active and Stored Aircraft".

Probable cause

A loss of engine power due to the failure of the engine # 6 connecting rod bearing. A factor was the collision with a gate. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
0
Temperature (F)
82
Nearest airport
CHARLESTON EXECUTIVE
Distance from field
0.0
Airport elevation
17

Aircraft

RegistrationMakeModelDamageFAR part
N3721K Globe GC-1B SUBS 091

Sequence of events

#OccurrencePhase
1 351 Cruise
2 180 Cruise
3 310 Cruise

Findings

Finding
14006 cause
20200 factor