N6503C Lancair LC42-550FG accident

NTSB SEA04LA040 · 2004-02-10 · Redmond, OR · near RDM

Docket — crew, injuries and powerplant

Summary

The commercial pilot at the controls and flight instructor in the right seat reported that during the approach for landing, about four feet above ground level over the runway, the stall warning horn sounded and the commercial pilot "chopped the power." The aircraft rapidly descended to the runway and touched down slightly left of centerline and in a nose high attitude. After touch down, the commercial pilot added full power, however the aircraft veered to the left. At this time the flight instructor took control of the aircraft in an attempt to regain runway heading. The flight instructor not realizing at first that the commercial pilot had applied full power, called for him to reduce power. Power was reduced, however, the aircraft exited the runway surface traveling over gravel and snow. During the landing roll, the right wing collided with a taxi sign, the outboard section of the right wing flap separated at the two outboard flap hinges, and the right main landing gear tire separated from the gear leg. Both pilots reported no mechanical failures or malfunctions with the aircraft at the time of the accident.

Full narrative

On February 10, 2004, at 0950 Pacific standard time, a Lancair LC42-550FG, N6503C, registered to Columbia Aero LLC, operated by Lancair as a 14 CFR Part 91 business flight, veered off the runway during the landing roll at Roberts Field, Redmond, Oregon, and collided with a taxi sign. Visual meteorological conditions prevailed at the time and no flight plan was filed. The aircraft was substantially damaged and the commercial pilot, flight instructor and two passengers were not injured. The flight departed from Bend, Oregon, about 10 minutes prior to the accident.

During a telephone interview and subsequent written statement from both the commercial pilot and flight instructor, it was reported that the commercial pilot was in the left seat and at the flight controls for the landing to runway 10. The commercial pilot stated that the approach was normal. When the aircraft was over the runway, about four feet above ground level, the stall warning horn sounded and he "chopped the power," and the aircraft rapidly descended to the runway. The aircraft touched down slightly left of runway centerline and in a nose high attitude. After the aircraft touched down the commercial pilot applied full power. The aircraft veered to the left, and at this time the flight instructor stated that he got on the rudder pedals and flight control in an attempt to regain runway heading. The flight instructor not realizing at first that the commercial pilot had applied full power, called for the commercial pilot to reduce power. Power was reduced, however, the aircraft exited the runway surface traveling over gravel and snow. During the landing roll, the right wing collided with a taxi sign, the outboard section of the right wing flap separated at the two outboard flap hinges, and the right main landing gear tire separated from the gear leg.

Both pilots reported no mechanical failures or malfunctions with the aircraft at the time of the accident.

Probable cause

The pilot rated passenger's failure to maintain directional control during the landing roll. Inadequate supervision by the pilot-in-command (CFI) and a taxiway sign were factors. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
10
Temperature (F)
37
Nearest airport
Roberts Field
Distance from field
0.0
Airport elevation
3077

Aircraft

RegistrationMakeModelDamageFAR part
N6503C Lancair LC42-550FG SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise
2 310 Cruise

Findings

Finding
24539 cause
24627 factor
20200 factor