N4974U Cessna 210E accident

NTSB IAD04LA011 · 2004-02-16 · Pittsburgh, PA · near AGC

Docket — crew, injuries and powerplant

Summary

Prior to a landing, the left main landing gear would not extend into a down and locked position. The pilot, who was also the airplane's owner and mechanic, landed with the right main and nose landing gear in the down and locked position, and the left main landing gear "hanging." Upon landing, the left main landing gear collapsed, and the airplane slid off the left side of the runway. A post-accident examination revealed that the left main landing gear saddle was fractured. The landing gear saddle was the subject of an Airworthiness Directive that first required its replacement, and after 1,200 hours of service on the new part, annual dye-penetrant inspections. A review of the airframe logbook revealed that the saddle was replaced, and that annual inspections should have begun in 1986; however, there were no records that they had ever been performed. Laboratory examination of the saddle fracture revealed features consistent with fatigue, and there was a lack of dye penetrant on the part.

Full narrative

On February 16, 2004, at 1426 eastern standard time, a Cessna 210E, N4974U, was substantially damaged while landing at Allegheny County Airport (AGC), Pittsburgh, Pennsylvania. The certificated commercial pilot and the passenger were not injured. Visual meteorological conditions prevailed, and no flight plan was filed for the local personal flight, conducted under 14 CFR Part 91.

According to the pilot, who was also the airplane's owner and mechanic, the left main landing gear would not extend into a down and locked position. The pilot decided to land with the right main and nose landing gear in the down and locked position, and the left main landing gear "hanging." Upon touchdown, the left main landing gear collapsed, and the airplane slid off the left side of the runway.

According to a Federal Aviation Administration (FAA) inspector, a post-accident examination of the airplane revealed that the left main landing gear saddle was fractured.

The landing gear saddle was the subject of an Airworthiness Directive (AD), AD 76-14-07 R2. The AD required replacement of the landing gear saddle, and after 1,200 hours of service on the new part, annual dye penetrant inspections. The FAA inspector's review of the airframe logbook revealed that the part was replaced in 1976, and was due for its first dye penetrant inspection in 1986. There were no records in the logbook to indicate that an annual inspection of the part had ever been performed.

The landing gear saddle was submitted to the Safety Board Materials Laboratory for examination. According to the engineer's factual report, the saddle fracture surfaces exhibited features consistent with fatigue. There was also no visual evidence of any dye penetrant on the part.

Probable cause

The owner/pilot-mechanic's failure to comply with an airworthiness directive, which resulted in a fatigue fracture to the left main landing gear saddle. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
27
Nearest airport
Allegheny County Airport
Distance from field
0.0
Airport elevation
1252

Aircraft

RegistrationMakeModelDamageFAR part
N4974U Cessna 210E SUBS 091

Sequence of events

#OccurrencePhase
1 320 Cruise
2 191 Cruise

Findings

Finding
10401
10401
19200
24103 cause