N48517 Grumman-Schweizer G-164B accident

NTSB CHI04CA151 · 2004-06-10 · Hope, ND

Docket — crew, injuries and powerplant

Summary

The airplane impacted tree branches while performing an aerial application flight. The pilot reported the left wing tip impacted tree branches during the spray-run, resulting in substantial damage to the wing. The pilot stated that an uneventful landing was made after dispensing the remainder of his chemical load.

Full narrative

On June 10, 2004, at 0700 central daylight time, a Grumman-Schweizer G-164B, N48517, piloted by a commercial pilot, was substantially damaged during an in-flight collision with tree branches while performing aerial application near Hope, North Dakota. Visual meteorological conditions prevailed at the time of the accident. The aerial application flight was operating under the provisions of 14 CFR Part 137 without a flight plan. The pilot was not injured. The local flight departed the Hashbarger Farm Airstrip (8NA9), Hope, North Dakota.

According to the pilot's written statement, the accident transpired during the first spray-run of the day. The pilot reported the left wing tip impacted tree branches during the spray-run, resulting in substantial damage to the wing. The pilot stated that an uneventful landing was made after dispensing the remainder of his chemical load.

Probable cause

The pilot's failure to maintain clearance from the tree branches during the aerial-application flight. A factor to the accident was the trees. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
25000
Visibility (sm)
7
Wind direction
100
Wind speed (kt)
8
Temperature (F)
57
Distance from field
1.0

Aircraft

RegistrationMakeModelDamageFAR part
N48517 Grumman-Schweizer G-164B SUBS 137

Sequence of events

#OccurrencePhase
1 220 Cruise

Findings

Finding
20200 factor
24526 cause