N213SD Bell 206B accident

NTSB SEA04LA102 · 2004-06-09 · Prosser, WA

Docket — crew, injuries and powerplant

Summary

During a right turn the helicopter's tail rotor became entangled in a power line. Pulling collective in an attempt to land on a road, the helicopter swung to the right and the main rotor struck another power line. As the pilot banked away from the second power line he seemed to gain some control of the aircraft before it impacted the ground. The helicopter came to rest in an upright position on its skids. No pre-accident anomalies with the helicopter were noted which would have precluded normal operations.

Full narrative

On June 8, 2004, at 1850 Pacific daylight time, a Bell 206B helicopter, N213SD, was substantially damaged after impacting power lines while maneuvering near Prosser, Washington. The commercial pilot and his sole passenger were not injured. The helicopter, registered to Heliworks Inc., of Pensacola, Florida, was being operated in accordance with 14 CFR Part 91. Visual meteorological conditions prevailed at the time of the accident, and a flight plan was not filed. The helicopter had departed the Tri-Cities Airport, Pasco, Washington, at approximately 1800

In a telephone interview with the NTSB investigator-in-charge (IIC), and according to the Pilot/Operator Aircraft Accident Report (NTSB form 6120.1/2), the pilot reported that while conducting cherry drying operations he made a right turn and caught the tail rotor in a power line. The pilot further reported, "...about 30 seconds later a vibration occurred. I pulled collective to attempt a landing on a road, [and] as I pulled collective the ship immediately swung to the right and the main rotor struck a power line." The pilot stated that he then banked away from the power line and "seemed" to gain some control. "I saw an opening in the orchard and headed for [it]. The ship came to rest upright between the trees."

The pilot reported damage to the helicopter included the transmission being separated from the airframe and the tail rotor and tail rotor assembly being damaged. The pilot also reported to the IIC that no anomalies existed with the helicopter prior to the accident which would have precluded normal operations.

Probable cause

The pilot's failure to maintain clearance with the power lines while maneuvering. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
340
Wind speed (kt)
3
Temperature (F)
63
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N213SD Bell 206B SUBS 091

Sequence of events

#OccurrencePhase
1 220 Cruise
2 230 Cruise

Findings

Finding
20200
24526 cause
19200