N202UX Beech 1900D accident

NTSB DEN05IA046 · 2005-01-04 · Denver, CO · near DEN

Docket — crew, injuries and powerplant

Summary

According to witnesses, the tug was parked behind the left wing of the airplane, facing in the opposite direction, with its engine running. The airplane's engines were not running. When the tug operator "jumped" onto the tug, he lost his footing and slipped. As he grabbed for something to catch his balance, his right arm hit the tug's gearshift lever. As the tug started moving forward in a right turn, the tug operator's left foot became caught between the tug's frame and left rear tire. The tug circled around the left wing tip of the airplane and it struck the left engine nacelle. The tug operator's foot became wedged between the tug and the airplane's stairs, resulting in a sprained left ankle and a few minor lacerations. The airplane sustained minor damage to the left engine nacelle and one propeller blade. According to the FAA, the tug operator's training records did not reflect the tug operator's qualifications to operate ground equipment, including the gas powered Kubota tug involved in this incident.

Full narrative

On January 3, 2005, at 1934 mountain standard time, a Beech 1900D, N202UX, operated by Great Lakes Aviation, Ltd, as Lakes Air Flight 5039, sustained minor damage when it was struck by a tug while parked at gate A52, Denver International Airport (DEN), Denver, Colorado. Night visual meteorological conditions (VMC) prevailed at the time of the incident. The airline transport certificated captain, and first officer and 13 passengers on board were not injured. The tug operator received minor injuries. The scheduled domestic passenger flight was being conducted under the provisions of Title 14 CFR Part 121 on an instrument flight rules (IFR) flight plan. The flight to McCook, Nebraska, was preparing for departure.

According to witnesses, the tug was parked behind the left wing of the airplane, facing in the opposite direction, with its engine running. The airplane's engines were not running. When the tug operator "jumped" onto the tug, he lost his footing and slipped. As he grabbed for something to catch his balance, his right arm hit the tug's gearshift lever. As the tug started moving forward in a right turn, the tug operator's left foot became caught between the tug's frame and left rear tire. The tug circled around the left wing tip of the airplane and it struck the left engine nacelle. The tug operator's foot became wedged between the tug and the airplane's stairs, resulting in a sprained left ankle and a few minor lacerations. The airplane sustained minor damage to the left engine nacelle and one propeller blade.

According to the FAA, the tug operator's training records did not reflect the tug operator's qualifications to operate ground equipment, including the gas powered Kubota tug involved in this incident.

Probable cause

the tug driver's failure to maintain operational control of the tug, resulting in impact with an airplane. Contributing factors include the tug driver's improper procedure, the tug driver's inadequate initial ground equipment training, and the company/operator's inadequate certification/approval of the tug driver. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Incident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Night/Dark
Ceiling (ft)
0
Visibility (sm)
4
Wind direction
20
Wind speed (kt)
4
Temperature (F)
25
Nearest airport
Denver Internationl
Distance from field
0.0
Airport elevation
5431

Aircraft

RegistrationMakeModelDamageFAR part
N202UX Beech 1900D MINR 121

Sequence of events

#OccurrencePhase
1 430 Cruise

Findings

Finding
20200 factor
24700 cause
30000 factor
34210 factor
92000 factor