N7053K Piper PA-20 accident
NTSB ATL05LA076 · 2005-04-28 · Thomaston, GA · near KOPN
Docket — crew, injuries and powerplant
Summary
The pilot stated the main wheels touched down normally; when the tailwheel touched down, the airplane pulled hard to the left, and application of the rudder had no effect. The airplane continued left off the side of the runway and collided with a lighting system. The tailwheel rudder arm assembly was found fractured and separated on the right side, and evidence of a previous weld repair inboard of the fracture was observed. The weld repair was observed at the thickest area of the tapered rudder arm assembly, and the fracture was observed at a smaller-diameter area. Metallurgical examination of the rudder arm assembly revealed the aluminum component showed deformation near the fracture surfaces with no evidence of fatigue.
Full narrative
On April 28, 2005, at 0935 eastern daylight time, a Piper PA-20, N7053K, registered to Matlad, Inc., and operated by the airline transport pilot, veered off the runway during landing roll at Thomaston - Upson County Airport, Thomaston, Georgia. The personal flight was operated under the provisions of Title 14 CFR Part 91 with no flight plan filed. Visual meteorological conditions prevailed. The airline transport pilot and the passenger were not injured, and the airplane sustained substantial damage. The flight departed Aiken Municipal Airport, Aiken, South Carolina, about 0815.
The pilot stated the approach to runway 30 was normal, and the main wheels touched down normally. The pilot stated that, when the tailwheel touched down, the airplane pulled hard to the left, application of the rudder had no effect, and the airplane continued left off the side of the runway. The airplane continued through the grass, and the empennage collided with the runway's precision approach path indicator lights.
Examination of the airplane revealed damage to the empennage and fuselage. The tailwheel rudder arm assembly was found fractured and separated on the right side, and evidence of a previous weld repair outboard of the fracture was observed. The weld repair was observed at the thickest area of the tapered rudder arm, and the fracture was observed at a smaller-diameter area. Metallurgical examination of the rudder arm revealed the aluminum component showed deformation near the fracture surfaces with no evidence of fatigue.
The pilot stated he had purchased the airplane two days before the accident, and the airplane had accumulated approximately 1.9 hours since annual inspection. Review of maintenance records for the airplane revealed no record of the rudder arm assembly repair.
Probable cause
The unapproved repair of the tailwheel rudder arm assembly, which resulted in an overload failure during touchdown and subsequent loss of control of the airplane and on-ground collision with an object. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 60
- Wind speed (kt)
- 3
- Temperature (F)
- 63
- Nearest airport
- Thomaston - Upson County
- Distance from field
- 0.0
- Airport elevation
- 796
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N7053K | Piper | PA-20 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | 130 | Cruise |
| 2 | 260 | Cruise |
| 3 | 310 | Cruise |
Findings
| Finding | |
|---|---|
| 10409 | |
| 10409 | |
| 24100 | cause |
| 24566 | |
| 20200 |