N369V Hughes 369A accident
NTSB SEA06CA102 · 2006-05-19 · Banks, OR · near 4S4
Docket — crew, injuries and powerplant
Summary
During the practical test for a flight instructor certificate, the pilot was asked by the examiner to perform a 180 degree autorotation with a power recovery. He entered the autorotation, executed the 180 degree turn, and initiated the flare at approximately 50 feet agl. He stated that he "failed to roll on enough throttle simultaneously with the flare as the rotor RPM started to decay." He further stated that the examiner told him, "power, power, power," which he interpreted as meaning pull up on the collective. The addition of pitch further decayed the rotor RPM. The helicopter made "a firm level landing," and the main rotor contacted and severed the tail boom. The pilot explained that in his training, he had learned to associate the term "power" with "pull power on the collective" and the term "roll on" with "roll on the throttle." When the examiner told him, "power, power, power," he reacted by applying collective, but the examiner was wanting him to add power by rolling on the throttle. The pilot stated that the accident could have been prevented by maintaining rotor RPM during the power recovery and "proper understanding of commands between DPE [examiner] and PIC."
Full narrative
On May 19, 2006, about 1300 Pacific daylight time, a Hughes 369A helicopter, N369V, sustained substantial damage during a hard landing at Skyport Airport near Banks, Oregon. The commercial pilot, who was taking the practical test for issuance of a flight instructor certificate, and the designated examiner were not injured. The helicopter was registered to and operated by Applebee Aviation, Inc., of Banks. Visual meteorological conditions prevailed and no flight plan was filed for the 14 CFR Part 91 flight. The flight departed from the Portland - Hillsboro Airport in Hillsboro, Oregon, about 1200.
The pilot reported that he was asked by the examiner to perform a 180 degree autorotation with a power recovery. He entered the autorotation, executed the 180 degree turn, and initiated the flare at approximately 50 feet agl. He stated that he "failed to roll on enough throttle simultaneously with the flare as the rotor RPM started to decay." He further stated that the examiner told him, "power, power, power," which he interpreted as meaning pull up on the collective. The addition of collective pitch further decayed the rotor RPM. The helicopter made "a firm level landing," and the main rotor contacted and severed the tail boom.
The pilot explained that in his training, he had learned to associate the term "power" with "pull power on the collective" and the term "roll on" with "roll on the throttle." When the examiner told him, "power, power, power," he reacted by applying collective, but the examiner was wanting him to add power by rolling on the throttle. The pilot stated that the accident could have been prevented by maintaining rotor RPM during the power recovery and "proper understanding of commands between DPE [examiner] and PIC."
Probable cause
The pilot's failure to maintain rotor rpm while performing a simulated autorotation, which resulted in a hard landing. A contributing factor was the pilot's incorrect interpretation of the examiner's instruction to add power. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Ceiling (ft)
- 0
- Wind direction
- 0
- Nearest airport
- Skyport
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N369V | Hughes | 369A | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | 200 | Cruise |
Findings
| Finding | |
|---|---|
| 19200 | |
| 13012 | |
| 24520 | |
| 24558 | cause |
| 24601 | factor |