N7939B Cessna 172 accident

NTSB ANC06CA138 · 2006-09-24 · Palmer, AK

Docket — crew, injuries and powerplant

Summary

The private certificated pilot was departing from a remote area that was about 900 feet long on a Title 14, CFR Part 91, local area personal flight. The pilot reported that he previously had trouble with the airplane's charging system. When he attempted to start the airplane for takeoff, the battery was dead. He placed the magneto switch on the left magneto to facilitate starting, and hand-propped the engine. He then began the takeoff roll, which was longer than he expected. In order to miss trees at the end of the departure area, the pilot applied left rudder to maneuver past the trees, but the right horizontal stabilizer and right elevator collided with high brush. The airplane became airborne, and the pilot continued to his destination, about 8 miles away. Upon landing, the pilot discovered substantial damage to the stabilizer and elevator. The pilot reported that he also discovered that the magneto switch was still on the left magneto position, and that he did not select the "both" magneto position prior to the takeoff, thereby reducing available engine power.

Full narrative

The private certificated pilot was departing from a remote area that was about 900 feet long on a Title 14, CFR Part 91, local area personal flight. The pilot reported that he previously had trouble with the airplane's charging system. When he attempted to start the airplane for takeoff, the battery was dead. He placed the magneto switch on the left magneto to facilitate starting, and hand-propped the engine. He then began the takeoff roll, which was longer than he expected. In order to miss trees at the end of the departure area, the pilot applied left rudder to maneuver past the trees, but the right horizontal stabilizer and right elevator collided with high brush. The airplane became airborne, and the pilot continued to his destination, about 8 miles away. Upon landing, the pilot discovered substantial damage to the stabilizer and elevator. The pilot reported that he also discovered that the magneto switch was still on the left magneto position, and that he did not select the "both" magneto position prior to the takeoff, thereby reducing available engine power.

Probable cause

The pilot's failure to follow the checklist to ensure the proper positioning of the magneto switch during the takeoff roll, which resulted in a partial loss of engine power, and a subsequent collision with high vegetation during the takeoff run. A factor contributing to the accident was the pilot's improper positioning of the magneto switch on the left magneto position. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Wind direction
0
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N7939B Cessna 172 SUBS 091

Sequence of events

#OccurrencePhase
1 354 Cruise
2 320 Cruise

Findings

Finding
14801 factor
24030 cause
19200