N727PD Winter J.T/Johnson Kitfox III accident

NTSB MIA07LA013 · 2006-11-11 · Southwest Ranch, FL

Docket — crew, injuries and powerplant

Summary

The flight instructor stated that while in cruise flight the engine suddenly began to operate "badly", and the whole airplane vibrated intensely. He said that they flew away from the populated residential areas and made a forced landing in the area of a landfill. During the landing rollout the airplane nosed over, incurring damage. According to the FAA inspector who responded to the scene of the accident, upon inspecting the airplane he found one propeller blade missing, with part of the blade root remaining in the hub. Furthermore, he found that one blade mounting bolt was loose and the bolt associated with the missing blade had fractured. The inspector noted no other anomalies with the accident airplane. On May 29, 2007 the NTSB sent the propeller, and its associated mounting hardware, minus the missing blade, to the propeller manufacturer, IVOProp Corporation, Long Beach, California, for further examination, under the supervision of an FAA inspector. The examination revealed that the propeller had been improperly assembled, and was missing the required Motion Detector Tape, which resulted in the blade bolt holes elongating, and one blade separating from the hub in flight.

Full narrative

On November 11, 2006, about 1419 eastern standard time, a Winter J.T/Johnson Kitfox III experimental amateur-built airplane, N727PD, registered to and operated by a private individual, as a Title 14 CFR Part 91 instructional flight, had the flight crew experience aircraft vibrations in-flight, and the crew made a forced landing in Southwest Ranches, Florida. Visual meteorological conditions prevailed, and no flight plan was filed. The commercial-rated flight instructor received no injuries, and the student pilot received minor injuries. The airplane incurred substantial damage. The flight originated in Southwest Ranches, the same day, about 1330.

The flight instructor stated that while in cruise flight the engine suddenly began to operate "badly", and the whole airplane vibrated intensely. He said that they flew away from the populated residential areas and made a forced landing in the area of a landfill. During the landing rollout the airplane nosed over, incurring damage.

According to the FAA inspector who responded to the scene of the accident, upon inspecting the airplane he found one propeller blade missing, with part of the blade root remaining in the hub.. Furthermore, he found that one blade mounting bolt was loose and the bolt associated with the missing blade had fractured. The inspector noted no other anomalies with the accident airplane.

The NTSB sent the propeller, and its associated mounting hardware, minus the missing blade, to the propeller manufacturer, IVOProp Corporation, Long Beach, California, for further examination, under the supervision of an FAA inspector. The examination revealed that the propeller had been improperly assembled, and was missing the required Motion Detector Tape, which resulted in the blade bolt holes elongating, and one blade separating from the hub in flight.

Probable cause

The owner/builder's improper maintenance/installation of the propeller which resulted in a propeller blade coming loose and separating from the hub. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
7
Temperature (F)
81
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N727PD Winter J.T/Johnson Kitfox III SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 180 Cruise
3 320 Cruise
4 300 Cruise

Findings

Finding
14500
24111 cause
19200