N180VT Cessna CE-180-A accident

NTSB ATL07CA008 · 2006-10-13 · Statesville, NC · near SVH

Docket — crew, injuries and powerplant

Summary

The pilot stated that on touchdown, the left main wheel locked up, and the airplane pulled sharply towards the left. He stated that just before the airplane departed the left side of the runway, the left wheel must have "broke loose," and the airplane veered sharply to the right. The airplane's left wingtip and propeller struck the runway. According to an A&P mechanic, when the airplane was rolled into the maintenance shop, the "wheels rolled fine." Examination of the brake system revealed no problems noted. Examination of the left main tire found no flat spots.

Full narrative

On October 13, 2006, at 1730 eastern daylight time, a Cessna 180A, N180VT, registered to Boggie Bag LLC, operating as a 14 CFR Part 91 personal flight, experienced a loss of control during landing roll at the Statesville Regional Airport in Statesville, North Carolina. Visual meteorological conditions prevailed, and no flight plan was filed. The airplane received substantial damage to the left outboard wing. The airline transport pilot reported no injuries. The flight originated from the Mallards Landing Airport in Locust Grove, Georgia, on October 13, 2006, at 1530.

The pilot stated that, on touch down, the airplane's left main wheel locked up, and the airplane pulled sharply towards the left side of the runway. He applied full right brake and rudder to try to keep the airplane from continuing its left pull and to try to keep it from departing the runway. He stated that, just before the airplane departed the left side of the runway, "the left wheel must have broke loose, and the aircraft veered sharply to the right, which caused the aircraft to come up onto the left main gear and left wing tip [and] come in contact with the runway. The aircraft went another 30-40 feet, stopping on the centerline of the runway, balancing on the left wing and left main gear. The aircraft slowly [tilted onto its nose], causing the propeller to impact the runway. The aircraft came to rest on the propeller, left main gear, and left wing tip."

According to an airframe and powerplant mechanic located at the Statesville Regional Airport, when the airplane was rolled into the maintenance shop, the "wheels rolled fine." The airplane was placed on jacks to elevate the left wheel, and examination of the brake system revealed that, when the brakes were applied several times, no problems noted. Examination of the left main tire found no flat spots.

Probable cause

The pilot's failure to maintain directional control during the landing roll, which resulted in an on-ground collision with the runway. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
140
Wind speed (kt)
4
Temperature (F)
57
Nearest airport
Statesville Regional Airport
Distance from field
0.0
Airport elevation
965

Aircraft

RegistrationMakeModelDamageFAR part
N180VT Cessna CE-180-A SUBS 091

Sequence of events

#OccurrencePhase
1 260 Cruise
2 320 Cruise

Findings

Finding
24539 cause
19200