N6631C Cessna 414A accident

NTSB CHI07LA064 · 2007-02-01 · Dickinson, ND · near DIK

Docket — crew, injuries and powerplant

Summary

The airplane received substantial damage when the right main landing gear retracted upon landing. The pilot reported that when he attempted to lower the landing gear during approach, both main landing gear indications did not show a down and locked condition. After several attempts at recycling the landing gear, the pilot tried to use the emergency gear extension method, but both main landing gear indications were not down and locked. The pilot then contacted an individual at the airport who informed the pilot that his main gear appeared to be down. The pilot then attempted to land the airplane, during which the right main gear retracted. Post accident examination of the landing gear system revealed no anomalies.

Full narrative

On February 1, 2007, about 1615 mountain standard time, a Cessna 414A, N6631C, piloted by a private pilot, received substantial damage when the right main landing gear retracted upon landing on runway 25 (4,700 feet by 75 feet, grooved asphalt) at Dickinson - Theodore Roosevelt Regional Airport (DIK), Dickinson, North Dakota. Visual meteorological conditions prevailed at the time of the accident. The 14 CFR Part 91 business flight was operating on an instrument rules flight plan. The pilot was uninjured. The flight originated from Billings Logan International Airport, Billings, Montana, about 1445, en route to DIK.

The pilot reported that as he neared DIK, he attempted to lower the landing gear. The pilot reported that he received a down and locked indication from the nose gear; however, both main landing gear did not show a down and locked indication. After several attempts at recycling the landing gear, the pilot tried to use the emergency gear extension method but still did not receive a down and locked indication for the main gear. The pilot then contacted an individual at the airport who informed the pilot that his main gear appeared to be down. The pilot then landed the airplane, during which the right main gear retracted.

According the Federal Aviation Administration inspector, an Airframe & Powerplant (A&P) mechanic with Inspection Authorization (IA) reported that the airplane was placed on jacks in order to cycle the landing gear system. The landing gear system operated normally, no anomalies were detected, and no repairs were made to the landing gear system.

Probable cause

The undetermined failure of the emergency landing gear system and the retraction of the right main landing gear during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
7
Wind direction
310
Wind speed (kt)
22
Nearest airport
DICKINSON MUNI
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6631C Cessna 414A SUBS 091

Sequence of events

#OccurrencePhase
1 130 Cruise
2 198 Cruise

Findings

Finding
10400 cause
10407 cause
19200