N150SP Bell 206 B3 accident

NTSB SEA07CA069 · 2007-03-05 · Custer, MT

Docket — crew, injuries and powerplant

Summary

While landing his helicopter at a cattle feeding lot, the pilot failed to maintain clearance from a piece of farm equipment that had been parked near the location that he chose to land at. While less than 10 feet above his landing spot, the pilot inadvertently allowed the tail rotor of the helicopter to come in contact with the piece of equipment.

Full narrative

While landing his helicopter at a cattle feeding lot, the pilot failed to maintain clearance from a piece of farm equipment that had been parked near the location that he chose to land at. While less than 10 feet above his landing spot, the pilot inadvertently allowed the tail rotor of the helicopter to impact the piece of equipment.

Probable cause

The pilot’s failure to maintain clearance between the tail rotor of his helicopter and a piece of farm equipment during the landing sequence. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Nearest airport
Private property
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N150SP Bell 206 B3 SUBS 091

Sequence of events

#OccurrencePhase
1 220 Cruise

Findings

Finding
20200 factor
24526 cause