N2778C Cessna 170B accident

NTSB SEA07CA125 · 2007-05-17 · Fairfield, ID

Docket — crew, injuries and powerplant

Summary

The pilot said that he entered the traffic pattern for a full stop landing. He set the airplane up for landing with two notches of flaps, and while turning from base to final, the airspeed got low and the airplane stalled. The pilot attempted to recover but the aircraft impacted a field adjacent to the airport. The left landing gear collapsed and the airplane spun 180 degrees from its impact heading. The airplane's fuselage/empennage were wrinkled and bent approximately 35 degrees, and the engine mount and firewall were bent.

Full narrative

The pilot said that he entered the traffic pattern for a full stop landing. He set the airplane up for landing with two notches of flaps, and while turning from base to final, the airspeed got low and the airplane stalled. The pilot attempted to recover but the aircraft impacted a field adjacent to the airport. The left landing gear collapsed and the airplane spun 180 degrees from its impact heading. The airplane's fuselage/empennage were wrinkled and bent approximately 35 degrees, and the engine mount and firewall were bent.

Probable cause

The pilot's failure to maintain adequate airspeed while turning from base to final, resulting in an inadvertent stall/mush and subsequent collision with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
90
Wind speed (kt)
5
Temperature (F)
81
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2778C Cessna 170B SUBS 091

Sequence of events

#OccurrencePhase
1 250 Cruise
2 230 Cruise

Findings

Finding
24506 cause
24553 cause
19200