N7878 Bell 47G-2A accident

NTSB DFW07CA156 · 2007-07-11 · Mercedes, TX · near T65

Docket — crew, injuries and powerplant

Summary

The single-engine helicopter collided with a power line during an aerial application flight. The 9,212-hour commercial pilot lost control of the helicopter following the collision and the airplane impacted the ground. The pilot, who sustained minor injuries, was able to egress the helicopter unassisted. The pilot reported that prior to the collision with the power line, the reciprocating engine helicopter was operating normally, and added that he never saw the power line during the flight prior to impact.

Full narrative

The single-engine helicopter collided with a power line during an aerial application flight. The 9,212-hour commercial pilot lost control of the helicopter following the collision and the airplane impacted the ground. The pilot, who sustained minor injuries, was able to egress the helicopter unassisted. The pilot reported that prior to the collision with the power line, the reciprocating engine helicopter was operating normally, and added that he never saw the power line during the flight prior to impact.

Probable cause

The pilot's failure to maintain clearance from the power transmission line. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
190
Wind speed (kt)
10
Temperature (F)
91
Nearest airport
MID VALLEY
Distance from field
4.0
Airport elevation
70

Aircraft

RegistrationMakeModelDamageFAR part
N7878 Bell 47G-2A SUBS 137

Sequence of events

#OccurrencePhase
1 220 Cruise
2 250 Cruise
3 230 Cruise

Findings

Finding
20200 cause
24526 cause
24583 factor