N85TC Bell 206 accident

NTSB DFW07CA185 · 2007-08-12 · Houma, LA

Docket — crew, injuries and powerplant

Summary

The single-engine helicopter was conducting a round-robin flight between two offshore oil platforms. On the return flight, the pilot heard an unusual noise followed by "pronounced roughness in the tail rotor system." After a few seconds the roughness decreased and the pilot determined that the tail rotor was still functional. After landing, the pilot performed a post-flight inspection of the helicopter and discovered a metal wire wrapped around both sides of the tail rotor. Post accident examination revealed structural damage to the tail rotor blades, the tail boom, and the lower portion of the vertical fin assembly, including the tail skid. According to the pilot's statement a 3-foot-by-4- foot sunshade used to protect the cockpit windows, departed the helicopter during the flight. The pilot reported that he had failed to properly secure the sunshade prior to takeoff, which inadvertently exited an open window and became entangled in the tail rotor system. The 11,944-hour airline transport rated pilot reported having accumulated 375-hours in the same make and model helicopter.

Full narrative

The single-engine helicopter was conducting a round-robin flight between two offshore oil platforms. On the return flight, the pilot heard an unusual noise followed by "pronounced roughness in the tail rotor system." After a few seconds the roughness decreased and the pilot determined that the tail rotor was still functional. After landing, the pilot performed a post-flight inspection of the helicopter and discovered a metal wire wrapped around both sides of the tail rotor. Post accident examination revealed structural damage to the tail rotor blades, the tail boom, and the lower portion of the vertical fin assembly, including the tail skid. According to the pilot's statement a 3-foot-by-4- foot sunshade used to protect the cockpit windows, departed the helicopter during the flight. The pilot reported that he had failed to properly secure the sunshade prior to takeoff, which inadvertently exited an open window and became entangled in the tail rotor system. The 11,944-hour airline transport rated pilot reported having accumulated 375-hours in the same make and model helicopter.

Probable cause

The pilot's failure to properly secure all loose items prior to takeoff. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N85TC Bell 206 SUBS 135

Sequence of events

#OccurrencePhase
1 220 Cruise

Findings

Finding
17124 cause
23313 cause
60000