N51698 Bell 206B-III accident

NTSB CHI08CA021 · 2007-10-18 · Medora, ND

Docket — crew, injuries and powerplant

Summary

The pilot lost control of the helicopter and it impacted the terrain after a skid caught the top of a wire fence. The helicopter was being used for a herding mission when the left skid caught the top wire of a ten foot high fence. The helicopter began a dynamic roll to the left and impacted the ground. The pilot reported trying to counteract the roll by "reducing the power and adjusting the cyclic but was unsuccessful."

Full narrative

The helicopter impacted the terrain after a skid caught the top of a wire fence. The helicopter was being used for a herding mission when the left skid caught the top wire of a ten foot high fence. The helicopter began a dynamic roll to the left and impacted the ground. The pilot reported trying to counteract the roll by "reducing the power and adjusting the cyclic but was unsuccessful." The main rotor blades were destroyed, the main rotor system separated from the mast, the main transmisison deck ripped from the fuselage and the tailboom separated from the fuselage. The pilot and passenger received minor injuries.

Probable cause

The pilot failed to maintain clearance from the fence while maneuvering at a low altitude, which resuled in the helicopter rolling over and impacting the terrain. A factor associated with the accident was the fence. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
2900
Visibility (sm)
7
Wind direction
338
Wind speed (kt)
10
Temperature (F)
45
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N51698 Bell 206B-III SUBS 091

Sequence of events

#OccurrencePhase
1 220 Cruise
2 250 Cruise
3 230 Cruise

Findings

Finding
20200 factor
24583 factor
24526 cause
24801 cause
19200