N22899 Cessna 150H accident

NTSB CHI08CA015 · 2007-10-05 · Clarksville, AR · near H35

Docket — crew, injuries and powerplant

Summary

The airplane impacted power lines and terrain after takeoff from runway 9 (4,508 feet by 75 feet, asphalt). The accident takeoff began from a taxiway intersection, with approximately 4,000 feet of runway available. The dual student was slow in applying the throttle and an additional 200 - 500 feet of runway was used before full throttle was reached. After liftoff, the flight instructor noted that the airplane was not climbing as expected. He subsequently noticed that the engine tachometer indicated only 2,000 revolutions per minute (RPM), instead of the normal 2,500 RPM. The flight instructor reported that at that point there was no longer sufficient runway remaining to land, so he elected to continue the flight. He stated that the main landing gear struck power lines off the end of the runway, and the airplane subsequently impacted a field on the opposite side of the lines. The nose landing gear collapsed and the airplane came to rest. Published performance data for the accident airplane indicated that the takeoff ground roll required was approximately 850 feet. The distance required to takeoff and clear a 50-foot obstacle was about 1,585 feet. The distance required to land over a 50-foot obstacle was approximately 1,090 feet.

Full narrative

The airplane was substantially damaged during an instructional flight when it impacted power lines and terrain after takeoff from runway 9 (4,508 feet by 75 feet, asphalt). The flight instructor reported that the accident takeoff began from a taxiway intersection, with approximately 4,000 feet of runway available. He stated that the dual student was slow in applying the throttle and estimated that an additional 200 - 500 feet of runway was used before full throttle was reached. After liftoff, he noted that the airplane was not climbing as expected. He stated that the engine tachometer indicated only 2,000 revolutions per minute (RPM), instead of the normal 2,500 RPM. The flight instructor reported that at that point there was no longer sufficient runway remaining to land, so he elected to continue the flight. He stated that the main landing gear struck power lines off the end of the runway, and the airplane subsequently impacted a field on the opposite side of the lines. The nose landing gear collapsed and the airplane came to rest.

Published performance data for the accident airplane indicated that the takeoff ground roll required was approximately 850 feet. The distance required to takeoff and clear a 50-foot obstacle was about 1,585 feet. The distance required to land over a 50-foot obstacle was approximately 1,090 feet. The elevation of the departure airport was 481 feet.

Probable cause

Failure of the flight instructor to identify the lack of airplane performance in a timely manner and to reject the takeoff. An additional cause was the partial loss of engine power for undetermined reasons. A contributing factor was the presence of the power lines off the end of the runway. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
84
Nearest airport
Clarksville Municipal
Distance from field
1.0

Aircraft

RegistrationMakeModelDamageFAR part
N22899 Cessna 150H SUBS 091

Sequence of events

#OccurrencePhase
1 352 Cruise
2 220 Cruise
3 230 Cruise

Findings

Finding
25000 cause
20200 factor
24542 cause
24505 cause
19200