N1234G Mooney M20J accident

NTSB LAX08LA184 · 2008-06-10 · Evanston, WY · near EVW

Docket — crew, injuries and powerplant

Summary

The pilot reported that he extended the landing gear while on approach for landing and got a "gear unsafe" red light indication. He recycled the landing gear and the gear light went out. The pilot called the local fixed base operator on the field and requested a flyby to confirm that the landing gear was down. Ground personnel indicated that the gear appeared to be down. The pilot accomplished the final pre-landing checks and landed the airplane. The landing gear collapsed immediately after touchdown. Postaccident examination of the airplane by a mechanic revealed that two wing skins and a metal tubular former in the belly needed to be replaced. The mechanic who inspected the landing gear stated that the gear collapsed because the over center tension for the nose wheel landing gear down locks was not properly adjusted.

Full narrative

On June 10, 2008, approximately 1030 mountain daylight time, a Mooney M20J, N1234G, sustained substantial damage when the landing gear collapsed during the landing roll at Burns Field (EVW), Evanston, Wyoming. The private pilot, the sole occupant, was not injured. The pilot/owner was operating the airplane under the provisions of 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed for the personal cross-country flight, which had originated from Rifle, Colorado, about 0800. The pilot had filed and opened a Visual Flight Rules flight plan.

In a written statement, the pilot reported that when he engaged the landing gear while on approach, he got an unsafe red gear light. The pilot recycled the landing gear and checked the circuit breakers. The light then went out. The pilot contacted the local Fixed Base Operator and requested a flyby to have someone confirm that the landing gear was down. Ground personnel reported to the pilot that the gear appeared down. The pilot accomplished his final pre-landing checks and landed the airplane. Immediately after touchdown, the landing gear collapsed.

Postaccident examination of the airplane by a mechanic revealed that two wing skins and a metal tubular former in the belly needed to be replaced. Two Federal Aviation Administration Form 337 approvals were required to return the airplane to service. The mechanic who performed the work said the gear collapsed due to the over center tension for the nose wheel landing gear down locks was not properly adjusted.

Probable cause

A collapse of the landing gear due to improper maintenance. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
250
Wind speed (kt)
22
Temperature (F)
63
Nearest airport
Burns Field
Distance from field
0.0
Airport elevation
7143

Aircraft

RegistrationMakeModelDamageFAR part
N1234G Mooney M20J SUBS 091

Sequence of events

#OccurrencePhase
1 Prior to flight Aircraft maintenance event Standing
2 Landing-landing roll Landing gear collapse defining Cruise

Findings

Finding
Personnel issues-Task performance-Maintenance-Scheduled/routine maintenance-Maintenance personnel cause
Aircraft-Aircraft systems-Landing gear system-Gear extension and retract sys-Incorrect service/maintenance cause