N3492C accident

NTSB ANC10LA026 · 2010-03-17 · Anchorage, AK · near LHD

Docket — crew, injuries and powerplant

Summary

The airline transport pilot was on a personal flight in a ski-equipped airplane. The pilot said that he was taxiing for takeoff when the right main landing gear leg broke near where the leg exits the fuselage. When the leg broke the right wing impacted the ground, bending the wing from the aileron outward toward the tip. An examination of the break showed a single linear break perpendicular to the leading edge of the gear leg. The break was about 6 inches from the gear leg mounting bolt hole, at the widest portion of the gear leg. The gear leg was retained for metallurgical examination by the Federal Aviation Administration.

Full narrative

On March 17, 2010, about 1530 Alaska daylight time, a ski-equipped Cessna 170B airplane, N3492C, sustained substantial damage when the main landing gear collapsed during taxi for takeoff, at Lake Hood Seaplane Base, Anchorage, Alaska. The airplane was being operated by the pilot as a visual flight rules (VFR) personal local flight under Title 14, CFR Part 91, when the accident occurred. The airline transport pilot and sole passenger were not injured. Visual meteorological conditions prevailed at the time of the accident, and no flight plan was filed.

During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on March 18, the pilot said he was taxiing for takeoff on Lake Hood when the right main landing gear leg broke near where the leg exits the fuselage. He said when the leg broke the right wing impacted the ground, bending the wing from the aileron outward toward the tip. He said there were no mechanical problems with the airplane prior to the accident.

During a meeting with the NTSB IIC on March 25, the pilot presented the broken gear leg to the IIC and an FAA air safety inspector. The break appeared to be a single linear break perpendicular to the leading edge of the gear leg. The break was about 6 inches from the gear leg mounting bolt hole, at the widest portion of the gear leg. No other damage was observed. The gear leg was retained by the FAA inspector for metallurgical examination.

Probable cause

The structural failure of the right main landing gear leg, resulting in the collapse of the landing gear. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
50
Wind speed (kt)
5
Temperature (F)
37
Nearest airport
Lake Hood
Distance from field
0.0
Airport elevation
71

Aircraft

RegistrationMakeModelDamageFAR part
N3492C — — SUBS 091

Sequence of events

#OccurrencePhase
1 Taxi-to runway Aircraft structural failure defining Taxi
2 Taxi-to runway Landing gear collapse Taxi

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause