N477EM Foley James Searey accident

NTSB NYC07CA057 · 2007-01-18 · Danbury, CT · near DXR

Docket — crew, injuries and powerplant

Summary

During a pre-buy and annual condition inspection of an amateur built Searey, the mechanic advised the pilot that the airplane's landing gear was out of adjustment. According to the airplane's maintenance records, the mechanic removed two bolts from the gear retraction drag links that were "to short," and replaced them with longer ones. He also found that the bolts were hitting the over center links and "repositioned the washers for more clearance." He then performed a retraction and extension test of the landing gear. Two landings later, the left main gear collapsed. The airplane slid off the side of the runway, struck a taxiway sign and was substantially damaged. During a postaccident examination by the airplane kit manufacturer, it was discovered that the "lock arms" were carrying the landing gear loads instead of the flat portion of the "angle" assembly, which normally rested against a wear pad. Further examination revealed that, sometime prior to the accident the bulkhead upright tubes had been bent outwards and the forked end of the hydraulic ram was out of adjustment and could not fully retract, keeping the knee joint from traveling into the over-center locking position.

Full narrative

During a pre-buy and annual condition inspection of an amateur built Searey, the mechanic advised the pilot that the airplane's landing gear was out of adjustment. According to the airplane's maintenance records, the mechanic removed two bolts from the gear retraction drag links that were "to short," and replaced them with longer ones. He also found that the bolts were hitting the over center links and "repositioned the washers for more clearance." He then performed a retraction and extension test of the landing gear. Two landings later, the left main gear collapsed. The airplane slid off the side of the runway, struck a taxiway sign and was substantially damaged. During a postaccident examination by the airplane kit manufacturer, it was discovered that the "lock arms" were carrying the landing gear loads instead of the flat portion of the "angle" assembly, which normally rested against a wear pad. Further examination revealed that, sometime prior to the accident the bulkhead upright tubes had been bent outwards and the forked end of the hydraulic ram was out of adjustment and could not fully retract, keeping the knee joint from traveling into the over-center locking position.

Probable cause

Collapse of the left main landing gear due to previous damage. A factor in the accident was the inadequate annual condition inspection. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
2400
Visibility (sm)
1.5
Wind direction
0
Temperature (F)
32
Nearest airport
Danbury Municipal Airport
Distance from field
0.0
Airport elevation
458

Aircraft

RegistrationMakeModelDamageFAR part
N477EM Foley James Searey SUBS 091

Sequence of events

#OccurrencePhase
1 190 Cruise

Findings

Finding
10401
10400 cause
24104 factor